WSP-SS-60NC (Mini-Monsoon 60)

WSP-SS-80NC (Mini-Monsoon 80)

WSP-SS-100NC (Mini-Monsoon 100)

NC Series submersible pump

What is an "NC Series" pump?

The NC Series stainless steel submersible pumps from Proactive are suitable for dedicated or non-dedicated groundwater monitoring applications in 2" wells where a simple sampling pump is desired. Three models are available which offer lifts of up to 100 feet (30m)*.

These pumps offer a simple solution when the project requires equipment which can be decontaminated. Their simple design offers reliable, long lasting service for groundwater monitoring or long term remediation, even is harsh conditions, with the convenience of the replaceable motor module.

The NC SERIES pumps are only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

* The WSP-SS-100NC DOES require the use of the ProBooster #1 in order to develop the full 100' lift.


FEATURES

  • simple to operate — powered by 12 volt DC batteries, they do not require the use of a flow controller*.
  • can operate under harsh conditions with higher turbidity
  • have been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term groundwater remediation
  • great substitute for Engineered Plastic Pumps
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • simple to clean and decontaminate
WSP-SS-60NC SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 60 ft (18.3m)
Power Consumption 150 watts (Max)
Input Voltage 12-15 volts DC
Maximum Amp Output 10 amps
Use with DOES NOT REQUIRE
A Power Booster or Controller
Supplied with 90 feet of heavy duty 10 gauge wire with alligator clamps, 1 motor module & wrench
Required Tubing 3/8" ID LDPE
Constructed High polish stainless steel

SS Mini-Monsoon 60 pump chart

WSP-SS-80NC SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 80 ft (24.4m)
Power Consumption 285 watts (Max)
Input Voltage 12-15 volts DC
Maximum Amp Output 19 amps
Use with DOES NOT REQUIRE
A Power Booster or Controller
Supplied with 90 feet of heavy duty 10 gauge wire with alligator clamps, 1 motor module & wrench
Required Tubing 3/8" ID LDPE
Constructed High polish stainless steel

SS Mini-Monsoon 80 pump chart

WSP-SS-100NC SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 100 ft (30.5m)
Power Consumption 285 watts (Max)
Input Voltage 12-15 volts DC
Maximum Amp Output 17 amps
Use with ProBooster #1
Supplied with 110 feet of heavy duty 10 gauge wire with alligator clamps, 1 motor module & wrench
Required Tubing 3/8" ID LDPE
Constructed High polish stainless steel

SS Mini-Monsoon 100 pump chart

 

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

replaceable stainless steel motor modulegif showing the procedure for replacing the motor module

WSP-SS-100 (SS Mega-Typhoon)

WSP-SS-100 SS Mega-Typhoon

extremely powerful

The SS Mega-Typhoon pump is capable of pumping up to 100 feet from ground level by simply connecting it to the PA-10660 (Low Flow with Power Booster 1 "LCD" Controller), then to a 12 volt battery, thereby energizing the pump.

The SS Mega-Typhoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

USE WITH: PA-10660 (Low Flow with Power Booster 1 "LCD" Controller)


FEATURES

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term remediation sites
  • simple to use—runs off of any 12 volt DC batteries
  • reliable design is suitable for continuous purging of groundwater wells
  • Low Flow Sample as low as 10 M/L per minute, from any depth, when using the PA-10660 (Low Flow with Power Booster 1 "LCD" Controller) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the PA-10660 (Low Flow with Power Booster 1 "LCD" Controller)
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • simple to clean and decontaminate
WSP-SS-100 SPECIFICATIONS
Dimensions length 6.5", diameter 1.82"
Maximum Lift Capacity 100 ft (30.5m)
Power Consumption 480 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 32 amps
Use with PA-10660 (Low Flow with Power Booster 1 "LCD" Controller)
Supplied with 110 feet of heavy duty 12 gauge PVC wire, neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing, teflon wire optional
Constructed High polish stainless steel

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

replaceable stainless steel motor modulegif showing the procedure for replacing the motor module

WSP-SS-120 (SS Monsoon)

WSP-SS-120 SS Monsoon

simple to use

The SS Monsoon pump is capable of pumping up to 120 feet from ground level by simply connecting it to the PA-10670 (Low Flow with Power Booster 2 “LCD” Controller) then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Monsoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

USE WITH: PA-10670 (Low Flow with Power Booster 2 "LCD" Controller)


FEATURES

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term remediation sites
  • simple to use—runs off of any 12 volt DC batteries
  • low flow sample as low as 10 ML per minute, from any depth, when using the PA-10670 (Low Flow with Power Booster 2 "LCD" Controller) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the PA-10670 (Low Flow with Power Booster 2 "LCD" Controller)
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate
WSP-SS-120 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 120 ft (37m)
Power Consumption 570 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 32 amps
Use with PA-10670 (Low Flow with Power Booster 2 "LCD" Controller)
Supplied with 130 feet of heavy duty 12 gauge wire, neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing, teflon wire optional
Constructed High polish stainless steel

SS Monsoon pump chart

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

replaceable stainless steel motor modulegif showing the procedure for replacing the motor module

WSP-SS-150 (SS Hurricane)

WSP-SS-150 SS Hurricane

simple to use & extremely powerful

The SS Hurricane pump is capable of pumping up to 150 feet from ground level by simply connecting it to the PA-10675 (Low Flow with Power Booster 2.5 "LCD" Controller), then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Hurricane is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

USE WITH: PA-10675 (Low Flow with Power Booster 2.5 "LCD" Controller)


FEATURES

  • can operate under harsh conditions with higher turbidity.
  • has been installed in hundreds of remediation sites using pump and treat systems
  • simple to use—runs off of any 12 volt DC batteries
  • low flow sample as low as 10 M/L per minute, from any depth, when using the PA-10675 (Low Flow with Power Booster 2.5 "LCD" Controller) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of thePA-10675 (Low Flow with Power Booster 2.5 "LCD" Controller)
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate
WSP-SS-150 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 150 ft (45.7m)
Power Consumption 920 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 36 amps
Use with PA-10675 (Low Flow with Power Booster 2.5 "LCD" Controller)
Supplied with 160 feet of heavy duty 10 gauge wire, additional motor module, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing, teflon wire optional
Constructed High polish stainless steel

SS Hurricane pump chart

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

replaceable stainless steel motor modulegif showing the procedure for replacing the motor module

WSP-SS-180 SS (Mega-Monsoon)

WSP-SS-180 SS Mega-Monsoon

simple to use

The SS Mega-Monsoon pump is capable of pumping up to 180 feet from ground level by simply connecting it to the PA-10680 (Low Flow with Power Booster 3 "LCD" Controller), then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Mega-Monsoon® is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

USE WITH: PA-10680 (Low Flow with Power Booster 3 "LCD" Controller)


FEATURES

  • can operate under harsh conditions with higher turbidity.
  • has been installed in hundreds of remediation sites using pump and treat systems
  • simple to use—runs off of any 12 volt DC batteries
  • low flow sample as low as 10 M/L per minute, from any depth, when using the PA-10680 (Low Flow with Power Booster 3 "LCD" Controller) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of thePA-10680 (Low Flow with Power Booster 3 "LCD" Controller)
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate
  • can also be used with solar panels for long term groundwater remediation
  • purchase of the WSP-SS-180 includes 1 replacement motor module
  • mounted on a heavy duty steel reel
WSP-SS-180 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 180 ft (55 m)
Power Consumption 1100 WATTS (MAX)
Input Voltage 12-15 volts DC
Maximum Amp Output 39 amps
Use with PA-10680 (Low Flow with Power Booster 3 "LCD" Controller)
Supplied with 210 feet of heavy duty 12 gauge wire, neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing, teflon wire optional
Constructed High polish stainless steel

SS Mega-Monsoon pump chart

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

replaceable stainless steel motor modulegif showing the procedure for replacing the motor module