WSP-19V-2 (Mega-Typhoon®)


WSP-19V-2 Mega-Typhoon®

19 volt engineered plastic submersible pump

This pump is capable of pumping up to 80 feet from ground level by simply connecting it to the PA-10600 (Power Booster 1 Controller) or PA-10650 (Low Flow with Power Booster 1 Controller), then connecting the controller's positive and negative alligator clamps to the 12 volt battery.

Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10600 (Power Booster 1 Controller) or PA-10650(Low Flow with Power Booster 1 Controller)


FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life
Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.
WSP-19V-2 MEGA-TYPHOON SPECIFICATIONS
Dimensions length 12", diameter 1.82"
Maximum Lift Capacity 80 ft (24.4m)
Input Voltage 12-15 volts DC
Maximum Amp Output 18 amps
Use with PA-10600 (Power Booster 1) or PA-10650 (Low Flow with Power Booster 1) Controller
Supplied with 90 feet of heavy duty 12 gauge wire & yellow connector
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Mega-Typhoon pump chart

 

WSP-24V-3 (Tsunami®)


WSP-24V-3 Tsunami

 

24 volt engineered plastic submersible pump

This pump is capable of pumping up to 100 feet from ground level by simply connecting it to the PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller), then connecting the controller's positive and negative alligator clamps to the 12 volt battery.

Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller)


FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life
Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.
WSP-24V-3 TSUNAMI SPECIFICATIONS
Dimensions length 17", diameter 1.82"
Maximum Lift Capacity 100 ft (30.5m)
Input Voltage 12-15 volts DC
Maximum Amp Output 22 amps
Use with PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller)
Supplied with 110 feet of heavy duty 12 gauge wire & green connector
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Tsunami pump chart

WSP-24V-4 (Monsoon®)


WSP-24V-4 Monsoon

24 volt engineered plastic submersible pump

This pump is capable of pumping up to 120 feet from ground level by simply connecting it to the PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller), then connecting the controller's positive and negative alligator clamps to the 12 volt battery.

Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller)


FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life
Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.
WSP-24V-4 MONSOON SPECIFICATIONS
Dimensions length 20", diameter 1.82"
Maximum Lift Capacity 120 ft (37m)
Input Voltage 12-15 volts DC
Maximum Amp Output 30 amps
Use with PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller)
Supplied with 130 feet of heavy duty 10 gauge wire & green connector
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Monsoon pump chart

WSP-24V-5 (Hurricane®)


WSP-24V-5 Hurricane

24 volt engineered plastic submersible pump

This pump is capable of pumping up to 150 feet from ground level by simply connecting it to the PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller), then connecting the controller's positive and negative alligator clamps to the 12 volt battery.

Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller)


FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life
<Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.
WSP-24V-5 HURRICANE SPECIFICATIONS
Dimensions length 26", diameter 1.82"
Maximum Lift Capacity 150 ft (46m)
Input Voltage 12-15 volts DC
Maximum Amp Output 34 amps
Use with PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller)
Supplied with 160 feet of heavy duty 10 gauge wire, green connector
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Hurricane pump chart

WSP-24V-6 (Mega-Monsoon®)


WSP-24V-6 Mega-Monsoon

24 volt engineered plastic submersible pump

This pump is capable of pumping up to 200 feet from ground level by simply connecting it to the PA-10850 (Low Flow with Power Booster 3 Controller), then connecting the controller's positive and negative alligator clamps to the 12 volt battery.

Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10850 (Low Flow with Power Booster 3 Controller)


FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life
Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.
WSP-24V-6 MEGA-MONSOON SPECIFICATIONS
Dimensions length 26", diameter 1.82"
Maximum Lift Capacity 200 ft (61m)
Input Voltage 12-15 volts DC
Maximum Amp Output 40 amps
Use with PA-10850 (Low Flow with Power Booster 3 Controller)
Supplied with 210 feet of heavy duty 10 gauge wire, blue connector
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Mega-Monsoon pump chart