STANDARD PERFORMANCE CONTROLLER
CONTROLLER ENGINEERED SPECIFICALLY FOR
PA-10800 Low Flow Sampling Controller

PA-10800

Low Flow Sampling Controller

Standard Performance Pumps:

Narrow diameter pumps:

With the Low Flow Sampling Controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40ml/min.
FEATURES
  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • low voltage disconnect(LVD) at 10.75 volts (turns off controller or allows pump to pulsate)
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • fuse to protect electronics and user
  • 6 month parts and labor warranty
  • 'Ramp Up' control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
HIGH PERFORMANCE CONTROLLERS
CONTROLLER ENGINEERED SPECIFICALLY FOR

PA-10600

Power Booster 1 Controller

PA-10600 Power Booster 1 Controller

WSP-19V-2 Mega-Typhoon®

PA-10650

Low Flow with Power Booster 1 Controller

PA-10650
Low Flow with Power Booster 1 Controller

WSP-19V-2 Mega-Typhoon®

This device will allow the user to regulate flow sampling as low as 40ml/min.

PA-10700

Power Booster 2 Controller

PA-10700
Power Booster 2 Controller

WSP-24V-3 Tsunami®

WSP-24V-4 Monsoon®

WSP-24V-5 Hurricane®

This booster works by increasing the voltage output on a 12-volt battery from 12 volts to a constant 19 volts.

PA-10750

Low Flow with Power Booster 2 Controller

PA-10750
Low Flow with Power Booster 2 Controller

WSP-24V-3 Tsunami®

WSP-24V-4 Monsoon®

WSP-24V-5 Hurricane®

This Device will allow the user to regulate flow sampling as low as 40ml/min.

PA-10850

Low Flow with Power Booster 3 Controller

PA-10850
Low Flow with Power Booster 3 Controller

WSP-24V-6 Mega-Monsoon®

This Device will allow the user to regulate flow sampling as low as 40ml/min.
FEATURES
  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • low voltage disconnect(LVD) at 10.75 volts (turns off controller or allows pump to pulsate)
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • fuse to protect electronics and user
  • 6 month parts and labor warranty
  • 'Ramp Up' control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
STAINLESS STEEL CONTROLLERS
CONTROLLER ENGINEERED SPECIFICALLY FOR

Pro Booster #1

Pro Booster #1

WSP-SS-100NC SS-Mini Monsoon® 100

When used with the WSP-SS-100NC, the ProBooster #1 allows this pump to deliver it's full performance. The ProBooster#1 amplifies the 12 volt signal from your deep cycle battery, boosting the WSP-SS-100NC performance and producing the maximum 100 foot lift available from this pump.

PA-10660

Low Flow with Power Booster 1 LCD Controller

PA-10660 
Low Flow with Power Booster 1 LCD Controller

WSP-SS-100 SS Mega-Typhoon®

With this controller, the user can precisely control the water discharge with the turn of a knob. This controller is used to monitor and regulate low flow sampling as low as 40ml/min.

PA-10670

Low Flow with Power Booster 2 LCD Controller

PA-10670
Low Flow with Power Booster 2 LCD Controller

WSP-SS-120 SS-Monsoon®

With this controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow with Power Booster 2 LCD Controller is used to monitor and regulate low flow sampling as low as 40ml/min.

PA-10675

Low Flow with Power Booster 2.5 LCD Controller

PA-10675
Low Flow with Power Booster 2.5 LCD Controller

WSP-SS-150 SS-Hurricane®

This booster works by increasing the voltage output on a 12-volt battery from 12 volts to a constant 19 volts.

PA-10680

Low Flow with Power Booster 3 LCD Controller

PA-10680
Low Flow with Power Booster 3 LCD Controller

WSP-SS-180 SS-Mega-Monsoon®

This controller will allow the user to regulate flow sampling as low as 40ml/min.
FEATURES
  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • easy to read LCD for precise control
  • low voltage disconnect (LVD) at 10.75 volts (turns off controller or allows pump to pulsate)
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 30 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "Ramp Up" control dial
  • steel handle for comfort and control