AQUAREAD™ flow through cell

The AQUAREAD™ Flow Through Cell (Flowcell) is designed for use with any AQUAPROBE™ and most third party pumping devices.

The Flowcell allows sample water to flow up through the AQUAPROBE™, passing over all the individual electrodes simultaneously. This eliminates air contact with pumped samples from groundwater boreholes,allowing truly representative measurements to be obtained. The superb sensitivity of the AQUAPROBE™ means that measurements can be taken at extremely low flow rates.

Manufactured from marine grade aluminum and 6mm (1/4") wall thickness acrylic, the Flowcell is ruggedly constructed for hard use in the field. The Flowcell is supplied with two pairs of spigots, one pair to fit 6mm (1/4") ID tube and one pair to fit 10mm (3/8") ID tube. The base flange includes four holes to allow the unit to be pegged down if necessary.

sleeve cap (AP-CAP)

Replacement protective probe sleeve end-cap.

extensions cables (EX-3, EX-10 and EX-30)

• 3 meter AQUAPROBE™ extension cable
• 10 meter AQUAPROBE™ extension cable
• 30 meter AQUAPROBE™ extension cable

DO membrane kit (MK-5)

5 replacement DO Electrode Membrane Caps complete with pre-fitted membranes. Shipped with a 25 mL bottle of Filling Solution (DO-25).

storage cap (PH-SC)

pH/ORP Electrode Storage Cap complete with warning lanyard and Storage Solution (SS-25).

meter lanyard (AM-LAN)

AQUAMETER™ Lanyard

hard carrying case (AR-CASE)

AQUAREAD™ hard carrying case complete with foam inserts.

pH/ORP electrode (COMBI-EL)

Replacement pH/ORP Electrode* shipped complete with protective storage cap and a 25mL bottle of Storage Solution (SS-25).

*will fit AP-700 & AP-800 only

shoulder bag (AR-BAG*)

AQUAREAD™ shoulder carrying bag complete with internal dividers.

pH electrode (PH-EL)

Replacement pH Electrode shipped complete with protective storage cap and a 25mL bottle of Storage Solution (SS-25).

rapidcal solution (RC-300)

300 mL RapidCal solution shipped in a wide neck bottle for direct probe insertion.

rapidcal solution (RC-600)

600mL bottle of RapidCal solution.

pH7.00 buffer (PH-700/300)

300mL pH 7.00 Buffer Solution shipped in a wide neck bottle for direct probe insertion.

pH7.00 buffer (PH-700/600)

600mL pH 7.00 Buffer Solution.

pH4.01 buffer (PH-401/300)

300mL pH 4.01 Buffer Solution shipped in a wide neck bottle for direct probe insertion.

pH4.01 buffer (PH-401/600)

600mL pH 4.01 Buffer Solution

Material Safety Data Sheet (MSDS)

zero oxygen solution (ZO-150)

150mL Zero Oxygen Solution shipped in a wide neck bottle for direct probe insertion.

zero oxygen solution (ZO-600)

600mL Zero Oxygen Solution

DO filling solution (DO-25)

25mL Oxygen Electrode filling solution

storage solution (SS-25)

25mL pH/ORP Electrode storage solution

calibration bottle (BOT-300)

300mL Wide neck calibration/rinse bottle for direct probe insertion