Home >>
AQUAREAD™ PRODUCT LINE
AQUAREAD™ Line
product categories
The AQUAREAD™ product range falls into the following 4 product categories:
GPS AQUAMETER™
the affordable multiparameter meter
The new GPS AQUAMETER™ from AQUAREAD™ is the world's most sophisticated, yet easy to use piece of water quality test equipment.
The GPS AQUAREADER™ is designed to interface to, and display readings from any one of eight AQUAREAD™ multiparameter probes.
There are 2 models available:
AQUAPROBES™
multi parameter
The real star of the AQUAREAD™ water quality testing system is the multi parameter AQUAPROBE™. Available in eight different versions to cover everything from basic pH testing right through to comprehensive water analysis, these probes are built from high quality marine grade aluminum and stainless steel to withstand rough treatment in the harshest environments.
Accessories
full range
AQUAREAD™ supplies a full range of accessories for use with their products.
AQUAREAD™ flow through cell
The AQUAREAD™ Flow Through Cell (Flowcell) is designed for use with any model of AQUAREAD™ AQUAPROBE and most third party pumping devices.
The Flowcell allows sample water t flow up through the AQUAPROBE™, passing over all the individual electrodes simultaneously. This eliminates air contact with pumped samples from groundwater boreholes,allowing truly representative measurements to be obtained. The superb sensitivity of the AQUAPROBE™ means that measurements can be taken at extremely low flow rates.
Manufactured from marine grade aluminum and 6mm (1/4") wall thickness acrylic, the Flowcell is ruggedly constructed for hard use in the field. The Flowcell is supplied with two pairs of spigots, one pair to fit 6mm (1/4") ID tube and one pair to fit 10mm (3/8") ID tube. The base flange includes four holes to allow the unit to be pegged down if necessary.
sleeve cap (AP-CAP)
Replacement protective probe sleeve end-cap.
extensions cables (EX-5, EX-10 and EX-30)
- 5 meter AQUAPROBE™ extension cable
- 10 meter AQUAPROBE™ extension cable
- 30 meter AQUAPROBE™ extension cable
DO membrane kit (MK-5)
5 replacement DO Electrode Membrane Caps complete with pre-fitted membranes. Shipped with a 25 mL bottle of filling solution.
storage cap (PH-SC)
pH/ORP Electrode Storage Cap complete with warning lanyard and Storage Solution.
meter lanyard (AM-LAN)
AQUAMETER™ Lanyard
hard carrying case (AR-CASE)
AQUAREAD™ hard carrying case complete with foam inserts.
shoulder bag (AR-BAG*)
AQUAREAD™ shoulder carrying bag complete with internal dividers.
pH electrode (PH-EL)
Replacement pH Electrode shipped complete with protective storage cap and a 25mL bottle of Storage Solution.
ORP electrode (ORP-EL)
Optional ORP Electrode shipped complete with protective storage cap and a 25mL bottle of Storage Solution.
AQUAREAD™ Calibration Solutions
AQUAREAD™ produces a full line of calibration solutions for use with the AQUAMETER™.
rapidcal solution (RC-300)
300 mL RapidCal solution shipped in a wide neck bottle for direct probe insertion.
rapidcal solution (RC-600)
600mL bottle of RapidCal solution.
pH7.00 buffer (PH-700/300)
300mL pH 7.00 Buffer Solution shipped in a wide neck bottle for direct probe insertion.
pH7.00 buffer (PH-700/600)
600mL pH 7.00 Buffer Solution.
pH4.01 buffer (PH-401/300)
300mL pH 4.01 Buffer Solution shipped in a wide neck bottle for direct probe insertion.
pH4.01 buffer (PH-401/600)
600mL pH 4.01 Buffer Solution
zero oxygen solution (ZO-150)
150mL Zero Oxygen Solution shipped in a wide neck bottle for direct probe insertion.
zero oxygen solution (ZO-600)
600mL Zero Oxygen Solution
DO filling solution (DO-25)
25mL Oxygen Electrode filling solution
storage solution (SS-25)
25mL pH/ORP Electrode storage solution
calibration bottle (BOT-300)
300mL Wide neck calibration/rinse bottle for direct probe insertion