state-of-the-art

At the heart of each multiparameter AQUAPROBE™ is a state-of-the-art, high speed microprocessor coupled to a multi-channel, 16 bit, high precision Analogue to Digital converter. This combination allows fast, accurate control and measurement of the data being provided by the individual electrodes. Up to 4 electrodes can be mixed and matched during manufacture in order to provide ten different models of the probe.

All ten versions are supplied with 3m cable and accessories as detailed in the product brochure.

PARAMETER	AQUAPROBE MODEL NUMBER
	AP-1000	AP-900	AP-800	AP-700	AP-600	AP-500	AP-400	AP-300	AP-200	AP-100
Turbidity	SF	SF	SF	—	SF	—	SF	—	SF	—
Dissolved Oxygen (Galvanic)	—	—	SF	SF	SF	SF	—	SF	—	—
Dissolved Oxygen (Optical)	SF	SF	—	—	—	—	—	—	—	—
Conductivity	SF	SF	SF	SF	SF	SF	—	SF	—	—
TDS	SF	SF	SF	SF	SF	SF	—	SF	—	—
Resistivity	SF	SF	SF	SF	SF	SF	—	SF	—	—
Salinity	SF	SF	SF	SF	SF	SF	—	SF	—	—
Seawater SG	SF	SF	SF	SF	SF	SF	—	SF	—	—
PH	SF	SF	SF	SF	SF	SF	SF	—	—	SF
ORP	SF	SF	SF	SF	O	O	O	—	—	O
Temperature	SF	SF	SF	SF	SF	SF	SF	SF	SF	SF
Depth	SF	—	—	—	—	—	—	—	—	—

 

SF = STANDARD FUNCTION

O = OPTIONAL ELECTRODE AVAILABLE TO PREFORM THIS FUNCTION

— = N/A

 

features

• waterproof plug assembly
• heavy guage marine grade aluminum removable protective sleeve—ensures the individual measurement electrodes are kept safe, even in the harshest environments
• 1.65" OD (42mm) — designed to fit comfortably into pipes, 2" wells and bore-holes
• each probe body is completely resin filled and fully waterproof for indefinite immersion
• threaded stem (and nut) provided at the top of the probe allows bracket or extension pole mounting

Extension cables are available in lengths of 5m (16'), 10m (32') & 30m (98'):

• Complete with in-line sockets
• Stackable to a total length of 100m (330')

 

calibration

Every AQUAPROBE™ is delivered fully calibrated and ready to use out of the box. All calibration data is stored on-board the probe so that probes and meters can be mixed and matched without any problems.

SEE VIDEO

recalibration

Recalibration is simple. For regular field use, AQUAREAD™ provides an all-in-one calibration solution, RAPIDCAL™, allowing easy one step calibration. Full calibration of each individual electrode is also straightforward, by following simple instructions on the AQUAMETER™.

IMPORTANT!

The sleeve on the Aquaprobe forms an integral part of the measurement system for both EC and turbidity. The Aquaprobe will not function properly without both halves of the sleeve fitted.

Aquaprobes™ get a new sleeve!

All Aquaprobes™ are now fitted with a new two-part sleeve. The upper half of the sleeve is attached to the Aquaprobe body in the same way as before, but the lower half of the sleeve can be unscrewed by hand to allow easy access to the electrodes for cleaning and maintenance without the need for re-calibration. The new two-part sleeve is completely compatible with all existing probes and flowcells, and can be retrofitted in just a few minutes. Replacement two-part sleeves are available.

IMPORTANT!

The sleeve on the Aquaprobe forms an integral part of the measurement system for both EC and turbidity. The Aquaprobe will not function properly without both halves of the sleeve fitted.

NEW! AP-1000 AQUAPROBE™

includes optical dissolved oxygen sensor & depth measurement

	PARAMETER	AP-1000	AP-900
	Turbidity	SF	SF
	Dissolved Oxygen (Optical)	SF	SF
	Conductivity	SF	SF
	TDS	SF	SF
	Resistivity	SF	SF
	Salinity	SF	SF
	Seawater SG	SF	SF
	PH	SF	SF
	ORP	SF	SF
	Temperature	SF	SF
	Depth	SF

 

The new AP-1000 Aquaprobe features Aquaread's nano engineered Optical Dissolved Oxygen (DO) sensor and depth measurement.

 

SF=Standard Function

 

also available: AP-900

The AP-900 Aquaprobe™ is identical to the AP-1000 but without depth.