pinpoint accuracy

The GPS AQUAMETER™ is designed to interface with and display readings from any one of ten AQUAREAD™ AQUAPROBES™ (multiparameter probes) as well as the AquaPlus Optical DO probe. When connected to the top-of-the-range AQUAPROBE-1000™, the unit can display the following 21 parameters, refreshing the data once per second.

PARAMETERS MEASURED with AQUAPROBE-1000™
√	Turbidity	√	Atmospheric Pressure
√	mg/L Dissolved Oxygen (DO)(Optical)	√	% Saturation DO
√	Electrical Conductivity (EC)	√	Absolute EC
√	Total Dissolved Solids (TDS)	√	Latitude
√	Resistivity	√	Longitude
√	Salinity	√	Height above MSL
√	Seawater Specific Gravity	√	OSGB Grid Reference
√	PH	√	Time
√	PH/mV	√	Date
√	ORP	√	Temperature
√	Depth

To take a reading, simply connect the selected AQUAPROBE™ to the GPS AQUAMETER™, then switch on and lower the probe.

am-200 features

• lanyard with quick release safety catch for easy hands-free operation
• integral atmospheric pressure sensor for fully automatic correction of Dissolved Oxygen readings
• tough, high impact, IP67 waterproof case with sure-grip rubber gasket, carefully sculpted to fit the hand
• large rubber keypad for ease of use with cold, wet hands or when wearing gloves
• readings can be logged automatically at a pre-determined rate or instantaneously along with calibration data (GLP) by pressing the M+ key
• recalling the data is simple — just press the MR key, then browse your readings using the arrow keys
• integral GPS receiver and antenna for position tagging of readings in either Lat/Long or British Ordnance Survey Grid Reference (OSGB) format
• large, high contrast display for perfect readability, backlit in low light conditions with a soft white light
• for clarity, readings are spread over several easy-to-read screens, each instantly accessible using the left or right arrow keys
• extremely simple multilingual operating system. All setup and calibration functions are accessed via the MENU key and navigated with the four arrow keys. At each level there is a simple choice of OK or ESC
• rugged,waterproof connector for Interfacing to a varitey of multiparameter AQUAPROBES™ or to a PC using the custom USB cable supplied as standard along with AQUALINK™ software

logging data

Logging data is simple. Either set the unit to log at regular intervals, or grab the current readings by hitting the M+ key.

To recall logged data on screen, simply hit the MR ley then browse using the arrow keys.

To copy the logged data to your PC, attach the custom USB cable and run the AQUALINK™ software utility (both supplied as standard). Once the data is transferred, AQUALINK™ can produce a comprehensive analytical report in a text format, or export the logged data to most popular spreadsheets as well as Google™ Maps and Google™ Earth, where the readings can be overlayed on either maps or satellite photos.

 

AM-200 SPECIFICATIONS
Dimensions	3.5"W x 7"H x 1.5"D
Weight (including batteries)	15.9 oz (450g)
Display	80 character FSTN LCD with backlight
Data Memory	1000 full sets including GLP data
GPS Receiver	12 channel with integral antenna
GPS Accuracy	+/- 10M in all 3 dimensions
Atmospheric Pressure	150mb-1150mb Accuracy +/- 1mb
Languages	English/French/German
PC Interface	USB (cable provided)
Power Supply	5 x AA cells. Alkaline or Ni-MH rechargeable
Battery Life	Alkaline 20 hours. Ni-MH 40 hours
Operating Temperature	-20°C to +70°C
Protection Class	IP67 (30 mins at 1M)