Inertial Pumps FiltersWelltapesHydraSleevesPeristaltic PumpsOther Products/Bailers

Home >>

SUBMERSIBLE PUMPS

Standard Performance Submersible Pumps

ready to use

Waterra introduces new Standard Performance Submersible Pumps designed specifically by Proactive for well purging and sampling procedures.

All of these pumps can greatly speed up the process of purging and sampling monitoring wells, especially if dedicated installations are used. These pumps are complete and ready to use.

features

  • excellent lift performance: from 25 to 70 feet depending upon which pump is used
  • suitable for continuous running – no cool down required (up to 5 hours)
  • long life motors – up to 100% longer than competitors' models
  • high performance DC electrical motor
  • optional on/off switch** for the electrical cable to allow the user to switch pump on and off without having to disconnect from power supply
  • delivered completely assembled
  • includes alligator clips
  • all pumps adapt to 1/2 x 3/8" Low density poly tubing

six models are currently available:

*The WSP-12V-4 is currently only available from Waterra's U.S. office.

Standard Performance Controller

easy to use

Proactive's Low Flow Sampling Controller gives you complete control over all of the Standard Performance pumps. This control allow you to adjust the voltage signal applied to the pumps from 0 to 12 VDC. It's light weight, portable and very simple to operate.

features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 20 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "ramp up" control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • steel handle for comfort and control

one model currently available:

 

 

 

High Performance
Submersible Pumps

even greater lift

Waterra introduces new High Performance Submersible Pumps designed specifically by Proactive for well purging and sampling procedures.

All of these pumps can greatly speed up the process of purging and sampling monitoring wells, especially if dedicated installations are used. These pumps are complete and ready to use.

features

  • requires high performance controller
  • suitable for continuous running – no cool down required (up to 5 hours)
  • long life motors – up to 100% longer than competitors' models
  • high performance DC electrical motor
  • delivered completely assembled

High Performance Pump Controllers

power when you need it

Proactive's High Performance Pumps deliver the increased lift performance over the Standard Performance by delivering a higher voltage signal to the submersible pump.

Two different Proactive High Performance Pump Controllers are available for each High Performance Pump. These two controllers differ from each other in that one is a Low Flow version of controller and the other is not. The regular control allows the operator to adjust the output voltage from the control to the pump between 12 VDC to the maximum output possible for the particular control. The Low Flow version of controller allows the operator to adjust the output signal to the pump from 0 VDC to the maximum capable for the control.

features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • low voltage disconnect(LVD) at 10.75 volts (turns off controller or allows pump to pulsate)
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • fuse to protect electronics and user
  • 6 month parts and labor warranty
  • 'Ramp Up' control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector

Stainless Steel
Submersible Pumps

advanced design

Waterra is now offering 3 new Stainless Steel 12 Volt Submersible Pumps. The WSP-SS-80, the WSP-SS-85NC and the WSP-SS-120 are capable of up to 120 of lift. These new pumps offer many features and advantages over other stainless steel submersible pumps.

These stainless steel pumps are all single stage, centrifugal pumps. They can be easily disassembled for decontamination or motor replacement. Their advanced design makes them largely impervious to silt and sand. These pumps are designed for 2" ID or larger monitoring wells. These pumps are extremely simple to use — simply connect to a 12 volt DC car battery and you're ready to go.

features

  • practically maintenance free
  • not affected by turbidity
  • easily disassembled for decontamination
  • purchase of the WSP-SS-80 and WSP-SS-120 includes 1 replacement motor module
  • the WSP-SS-80 and WSP-SS-120 are mounted on a heavy duty steel reel
  • the WSP-SS-80 and WSP-SS-120 are suitable for use in "low flow" sampling environments (as low as 10 ml/minute)

Stainless Steel Pump Controllers

low flow adjustable

Proactive's Stainless Steel Pumps deliver their exceptional performance partly because of the advanced design of their controllers. Three different control models are available, each matched to it's own pump. Light weight and portable with excellent features, this equipment will deliver the performance you expect.

features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • easy to read LCD for precise control
  • low voltage disconnect(LVD) at 10.75 volts (turns off controller or allows pump to pulsate)
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 30 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "ramp up" control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • steel handle for comfort and control