HIGH TURBIDITY
MEDIUM TURBIDITY
0.2 MICRON
WATER LEVEL SENSORS
OIL/WATER INTERFACE SENSORS
SPECTRA PERISTALTIC PUMP
PEGASUS PERISTALTIC PUMPS
 
WSP-12V-1 SPECIFICATIONS
Dimensions length 7", diameter 1.82"
Maximum Lift Capacity 25 ft (7.6m)
Input Voltage 12-15 volts DC
Maximum Amp Output 4 amps
Use with Optional Low Flow Sampling Controller
Supplied with 35 feet of heavy duty 12 gauge wire, cigarette plug & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous

Engineered Plastic
Cyclone® pump

12 volt

The Engineered Plastic Cyclone® pump is capable of pumping up to 25 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

Download PDF

 

features

• can operate under harsh conditions and higher turbidity

• runs continuously in water without the need for a cool down

• sleek exterior minimizes well hang-ups

• very reliable and economical

• 400 hour motor life

Low Flow Sampling Controller

engineered specifically for Proactive's™ 12 Volt standard pump line

The Proactive™ Low Flow Sampling Controller is engineered specifically for the Standard Engineered Plastic Cyclone®, Mini-Typhoon®, Typhoon®, Tempest®, Mini-Monsoon®, and Tornado pumps. This controller will not work with the Super Twister®. With the Low Flow Sampling Controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40ml/min.

Download PDF

controller features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 20 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "ramp up" control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • steel handle for comfort and control
 
WSP-12V-2M SPECIFICATIONS
Dimensions length 12", diameter 1.82"
Maximum Lift Capacity 40 ft (12.2m)
Input Voltage 12-15 volts DC
Maximum Amp Output 7 amps
Use with optional Low Flow Sampling Controller
Supplied with 50 feet of heavy duty 12 gauge wire, cigarette plug & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous

Engineered Plastic
Mini-Typhoon® pump

12 volt

The Engineered Plastic Mini-Typhoon® pump is capable of pumping up to 40 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

Download PDF

features

• can operate under harsh conditions and higher turbidity

• runs continuously in water without the need for a cool down

• sleek exterior minimizes well hang-ups

• very reliable and economical

• 400 hour motor life

Low Flow Sampling Controller

engineered specifically for Proactive's™ 12 Volt standard pump line

The Proactive™ Low Flow Sampling Controller is engineered specifically for the Standard Engineered Plastic Cyclone®, Mini-Typhoon®, Typhoon®, Tempest®, Mini-Monsoon®, and Tornado pumps. This controller will not work with the Super Twister®. With the Low Flow Sampling Controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40ml/min.

Download PDF

controller features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 20 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "ramp up" control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • steel handle for comfort and control
 
WSP-12V-2 SPECIFICATIONS
Dimensions length 12", diameter 1.82"
Maximum Lift Capacity 50 ft (15.25m)
Input Voltage 12-15 volts DC
Maximum Amp Output 8 amps
Use with optional Low Flow Sampling Controller
Supplied with 60 feet of heavy duty 12 gauge wire, cigarette plug & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous

Engineered Plastic Typhoon® pump

12 volt

The Engineered Plastic Typhoon® pump is capable of pumping up to 50 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

Download PDF

features

• can operate under harsh conditions and higher turbidity

• runs continuously in water without the need for a cool down

• sleek exterior minimizes well hang-ups

• very reliable and economical

• 400 hour motor life

Low Flow Sampling Controller

engineered specifically for Proactive's™ 12 Volt standard pump line

The Proactive™ Low Flow Sampling Controller is engineered specifically for the Standard Engineered Plastic Cyclone®, Mini-Typhoon®, Typhoon®, Tempest®, Mini-Monsoon®, and Tornado pumps. This controller will not work with the Super Twister®. With the Low Flow Sampling Controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40ml/min.

Download PDF

controller features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 20 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "ramp up" control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • steel handle for comfort and control
 
WSP-12V-3 SPECIFICATIONS
Dimensions length 17", diameter 1.82"
Maximum Lift Capacity 60 ft (18.3m)
Input Voltage 12-15 volts DC
Maximum Amp Output 11 amps
Use with optional Low Flow Sampling Controller
Supplied with 70 feet of heavy duty 12 gauge wire, cigarette plug & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous

Engineered Plastic Tempest® pump

12 volt

The Engineered Plastic Tempest® pump is capable of pumping up to 60 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

Download PDF

features

• can operate under harsh conditions and higher turbidity

• runs continuously in water without the need for a cool down

• sleek exterior minimizes well hang-ups

• very reliable and economical

• 400 hour motor life

Low Flow Sampling Controller

engineered specifically for Proactive's™ 12 Volt standard pump line

The Proactive™ Low Flow Sampling Controller is engineered specifically for the Standard Engineered Plastic Cyclone®, Mini-Typhoon®, Typhoon®, Tempest®, Mini-Monsoon®, and Tornado pumps. This controller will not work with the Super Twister®. With the Low Flow Sampling Controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40ml/min.

Download PDF

controller features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 20 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "ramp up" control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • steel handle for comfort and control
 
WSP-12V-4 SPECIFICATIONS
Dimensions length 20", diameter 1.82"
Maximum Lift Capacity 70 ft (21.3m)
Input Voltage 12-15 volts DC
Maximum Amp Output 13 amps
Use with optional Low Flow Sampling Controller
Supplied with 80 feet of heavy duty 12 gauge wire, cigarette plug & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous

Engineered Plastic Mini-Monsoon® pump

12 volt

The Engineered Plastic Mini-Monsoon® pump is capable of pumping up to 70 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

Download PDF

features

• can operate under harsh conditions and higher turbidity

• runs continuously in water without the need for a cool down

• sleek exterior minimizes well hang-ups

• very reliable and economical

• 400 hour motor life

Low Flow Sampling Controller

engineered specifically for Proactive's™ 12 Volt standard pump line

The Proactive™ Low Flow Sampling Controller is engineered specifically for the Standard Engineered Plastic Cyclone®, Mini-Typhoon®, Typhoon®, Tempest®, Mini-Monsoon®, and Tornado pumps. This controller will not work with the Super Twister®. With the Low Flow Sampling Controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40ml/min.

Download PDF

controller features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • 20 AMP "safety" fuse to protect electronics and user
  • 6 month parts and labour warranty
  • "ramp up" control dial
  • 3 foot wire lead to battery clamps and 5 foot wire leads to pump connector
  • steel handle for comfort and control
 
WSP-12V-5 SPECIFICATIONS
Dimensions length 24", diameter 1.82"
Maximum Lift Capacity 100 ft (30m)Pump Chart Button
Input Voltage 12-15 volts DC
Maximum Amp Output 15 amps
Supplied with 110 feet of heavy duty 10 gauge wire & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous

sidebar content

Engineered Plastic Tornado® pump

12 volt

The Engineered Plastic Tornado® pump is capable of pumping up to 85 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

Download PDF

features

• can operate under harsh conditions and higher turbidity

• runs continuously in water without the need for a cool down

• sleek exterior minimizes well hang-ups

• very reliable and economical

• 400 hour motor life

 

Standard Performance Submersible Pumps

ready to use

Waterra introduces new Standard Performance Submersible Pumps designed specifically by Proactive for well purging and sampling procedures.

All of these pumps can greatly speed up the process of purging and sampling monitoring wells, especially if dedicated installations are used. These pumps are complete and ready to use.

Download PDF