HIGH TURBIDITY
MEDIUM TURBIDITY
0.2 MICRON
WATER LEVEL SENSORS
OIL/WATER INTERFACE SENSORS
SPECTRA PERISTALTIC PUMP
PEGASUS PERISTALTIC PUMPS
 
WSP-SS-80 NC SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 80 ft (24.4m)
Input Voltage 12-15 volts DC
Maximum Amp Output 16 amps
Use with

Does not require a Power Booster or Controller
Supplied with 90 feet of heavy duty 10 gauge wire, 1 motor module & wrench
Required Tubing 3/8" ID poly tubing can be used
Constructed High polish stainless steel
sidebar content

Stainless Steel
Mini-Monsoon pump

for harsh environments

The SS Mini-Monsoon pump is capable of pumping up to 80 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous groundwater purging or long-term remediation projects.

The SS Mini-Monsoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing
Download PDF

 

features

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term groundwater remediation
  • simple to use—runs off of any 12 volt DC batteries
  • great substitute for Engineered Plastic Pumps
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • simple to clean and decontaminate

 

PA-14030

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

Does not require a Power booster or Controller

 
WSP-SS-80 SPECIFICATIONS
Dimensions length 6.5", diameter 1.82"
Maximum Lift Capacity 80 ft (24.4m)
Input Voltage 12-15 volts DC
Maximum Amp Output 20 amps
Use with Low Flow with Power Booster 1 "LCD" Controller (PA-10660)
Supplied with 90 feet of heavy duty 12 gauge PVC wire, neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing, teflon wire optional
Constructed High polish stainless steel
sidebar content

Stainless Steel
Mega-Typhoon pump

extremely powerful

The SS Mega-Typhoon pump is capable of pumping up to 80 feet from ground level by simply connecting it to the Low Flow with Power Booster 1 "LCD" Controller, then to a 12 volt battery, thereby energizing the pump.

The SS Mega-Typhoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing
Download PDF

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term remediation sites
  • simple to use—runs off of any 12 volt DC batteries
  • reliable design is suitable for continuous purging of groundwater wells
  • Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 1 “LCD” Controller and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 1 “LCD” Controller
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • simple to clean and decontaminate

PA-14050

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

 
WSP-SS-120 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 120 ft (37m)
Input Voltage 12-15 volts DC
Maximum Amp Output 38 amps
Use with Low Flow with Power Booster 2 "LCD" Controller (PA-10670)
Supplied with 130 feet of heavy duty 12 gauge wire, neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing can be used
Construction High polish stainless steel
sidebar content

Stainless Steel Monsoon pump

simple to use

The SS Monsoon pump is capable of pumping up to 120 feet from ground level by simply connecting it to the Low Flow with Power Booster 2 “LCD” Controller, then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS-Monsoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing
Download PDF

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term remediation sites
  • simple to use—runs off of any 12 volt DC batteries
  • low flow sample as low as 10 ML per minute, from any depth, when using the Low Flow with Power Booster 2 "LCD" Controller (PA-10670) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2 “LCD” Controller
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate

PA-14060

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

 
WSP-SS-150 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 150 ft (45.7m)
Input Voltage 12-15 volts DC
Maximum Amp Output 38 amps
Use with Low Flow with Power Booster 2.5 "LCD" Controller (PA-10675)
Supplied with 160 feet of heavy duty 10 gauge wire, additional motor module, disposable low flow control valve and wrench
Required Tubing 3/8" ID tubing can be used
Construction High polish stainless steel
sidebar content

Stainless Steel Hurricane pump

simple to use & extremely powerful

The SS Hurricane pump is capable of pumping up to 150 feet from ground level by simply connecting it to the Low Flow with Power Booster 2.5 "LCD" Controller (PA-10675), then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Hurricane is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing
Download PDF

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity.
  • has been installed in hundreds of remediation sites using pump and treat systems
  • simple to use—runs off of any 12 volt DC batteries
  • low flow sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 2.5 "LCD" Controller (PA-10675) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2.5 "LCD" Controller (PA-10675)
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate

PA-14065

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

 
WSP-SS-SC SPECIFICATIONS
Dimensions length 6.5", diameter 1.82"
Maximum Lift Capacity 180 ft (55m)
Input Voltage 12-15 volts DC
Maximum Amp Output 20 amps
Use with Sample Champ Low Flow Power Booster Controller (PA-10678)
Supplied with a custom length of heavy duty 12 gauge PVC wire, additional motor module, disposable low flow control valve and wrench
Required Tubing 3/8" ID tubing can be used, Teflon wire optional
Construction High polish stainless steel
sidebar content

Stainless Steel Sample Champ™

less than $900

Finally, an affordable stainless steel submersible pump for dedicated 2" monitoring well applications.

The SS Sample Champ™ pump is capable of pumping up to 180 feet from ground level by simply connecting it to the Sample Champ Low Flow Power Booster Controller (PA-10678), then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Sample Champ® is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

Download PDF

VIEW LARGER IMAGE

features

  • can be dedicated for under $900* per monitoring well
  • suitable for well purging, sampling and even low flow sampling
  • can provide lifts of up to 180 feet (~55m)
  • fabricated with custom cable lengths
  • available for dedicated installations only
  • can operate under harsh conditions with higher turbidity.
  • has been installed in hundreds of remediation sites using pump and treat systems
  • simple to use—runs off of any 12 volt DC batteries
  • low flow sample as low as 10 M/L per minute, from any depth, when using the Sample Champ Low Flow Power Booster Controller (PA-10678) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Sample Champ Low Flow Power Booster Controller (PA-10678)
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate
  • can also be used with solar panels for long term groundwater remediation
  • purchase of the WSP-SS-SC includes 1 replacement motor module
  • mounted on a heavy duty steel reel
*Requires the purchase of three WSP-SS-SC Sample Champ™ pumps

PA-14069

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

 
WSP-SS-200 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 200 ft (61m)
Input Voltage 12-15 volts DC
Maximum Amp Output 42 amps
Use with Low Flow with Power Booster 3 "LCD" Controller (PA-10680)
Supplied with 210 feet of heavy duty 10 gauge wire, additional motor module, disposable low flow control valve and wrench
Required Tubing 3/8" ID tubing can be used
Construction High polish stainless steel
sidebar content

Stainless Steel Mega-Monsoon pump

simple to use

The SS Mega-Monsoon® pump is capable of pumping up to 200 feet from ground level by simply connecting it to the Low Flow with Power Booster 3 "LCD" Controller (PA-10680), then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Mega-Monsoon® is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing
Download PDF

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity.
  • has been installed in hundreds of remediation sites using pump and treat systems
  • simple to use—runs off of any 12 volt DC batteries
  • low flow sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 3 "LCD" Controller (PA-10680) and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 3 "LCD" Controller (PA-10680)
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate
  • can also be used with solar panels for long term groundwater remediation
  • purchase of the WSP-SS-200 includes 1 replacement motor module
  • mounted on a heavy duty steel reel

PA-14070

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

 

Stainless Steel
Submersible Pumps

advanced design

Waterra offers six Stainless Steel 12 Volt Submersible Pumps from Proactive™. These pumps offer many features and advantages over other stainless steel submersible pumps.

These stainless steel pumps are all single stage, centrifugal pumps. They can be easily disassembled for decontamination or motor replacement. Their advanced design makes them largely impervious to silt and sand. These pumps are designed for 2" ID or larger monitoring wells. These pumps are extremely simple to use — simply connect to a 12 volt DC car battery and you're ready to go.

Download PDF