Inertial Pumps FiltersSubmersible PumpsWelltapesHydraSleevesPeristaltic PumpsOther Products/Bailers

Home >>

STAINLESS STEEL SUBMERSIBLE PUMPS


WSP-SS-85 NC SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 80 ft (24.4m)
Input Voltage 12-15 volts DC
Maximum Amp Output 16 amps
Use with Does not require a Power booster or Controller
Supplied with 90 feet of heavy duty 10 gauge wire, 1 motor module & wrench
Required Tubing 3/8" ID poly tubing can be used
Constructed High polish stainless steel
sidebar content

Stainless Steel
Mini-Monsoon pump

for harsh environments

The SS Mini-Monsoon pump is capable of pumping up to 80 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous groundwater purging or long-term remediation projects.

The SS Mini-Monsoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term groundwater remediation
  • simple to use—runs off any of any 12 volt DC batteries
  • great substitute for Engineered Plastic Pumps
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • simple to clean and decontaminate

 

"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

Does not require a Power booster or Controller

 

 

WSP-SS-80 SPECIFICATIONS
Dimensions length 6.5", diameter 1.82"
Maximum Lift Capacity 80 ft (24.4m)
Input Voltage 12-15 volts DC
Maximum Amp Output 20 amps
Use with Low Flow with Power Booster 1 "LCD" Controller (PA-10660)
Supplied with 90 feet of heavy duty 12 gauge PVC wire, neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing, teflon wire optional
Constructed High polish stainless steel
sidebar content

Stainless Steel
Mega-Typhoon pump

extremely powerful

The SS Mega-Typhoon pump is capable of pumping up to 80 feet from ground level by simply connecting it to the Low Flow with Power Booster 1 "LCD" Controller, then to a 12 volt battery, energizing the pump.

The SS Mega-Typhoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term remediation sites
  • simple to use—runs off any 12 volt DC batteries
  • reliable design is suitable for continuous purging of groundwater wells
  • Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 1 “LCD” Controller and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 1 “LCD” Controller
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • simple to clean and decontaminate
"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

 

WSP-SS-120 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 120 ft (37m)
Input Voltage 12-15 volts DC
Maximum Amp Output 38 amps
Use with Low Flow with Power Booster 2 "LCD" Controller (PA-10670)
Supplied with 130 feet of heavy duty 12 gauge wire, neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench
Required Tubing 3/8" ID poly tubing can be used
Construction High polish stainless steel
sidebar content

Stainless Steel Monsoon pump

simple to use

The SS Monsoon pump is capable of pumping up to 120 feet from ground level by simply connecting it to the Low Flow with Power Booster 2 “LCD” Controller, then to a 12 volt battery, energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS-Monsoon is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity
  • has been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term remediation sites
  • simple to use — runs off any 12 volt DC batteries
  • low flow sample as low as 10 ML per minute, from any depth, when using the Low Flow with Power Booster 2 “LCD” Controller and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2 “LCD” Controller
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate
"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.

 

WSP-SS-150 SPECIFICATIONS
Dimensions length 7.5", diameter 1.82"
Maximum Lift Capacity 150 ft (45.7m)
Input Voltage 12-15 volts DC
Maximum Amp Output 38 amps
Use with Low Flow with Power Booster 2.5 "LCD" Controller (PA-10675)
Supplied with 160 feet of heavy duty 10 gauge wire, additional motor module, disposable low flow control valve and wrench
Required Tubing 3/8" ID tubing can be used
Construction High polish stainless steel
sidebar content

Stainless Steel Hurricane pump

simple to use & extremely powerful

The SS Hurricane pump is capable of pumping up to 150 feet from ground level by simply connecting it to the pump connector to the Low Flow with Power Booster 2.5 "LCD" Controller, then to a 12 volt battery, energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Hurricane is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

VIEW LARGER IMAGE

features

  • can operate under harsh conditions with higher turbidity.
  • has been installed in hundreds of remediation sites using pump and treat systems
  • simple to use —runs off any 12 volt DC batteries
  • low flow sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 2.5 “LCD” Controller and low flow control valve (Sold Separately).
  • easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2.5 “LCD” Controller
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • simple to clean and decontaminate
"30 Second Change Out" Motor Design

The main wear out parts, consisting of the motor and seal, all have been incorporated into a single replaceable motor module.

Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump.