- INERTIAL PUMPS
- FILTERS
- SUBMERSIBLE PUMPS
- WELLTAPES
- SAMPLERS & WELLCAPS
- PERISTALTIC PUMPS
- MEASUREMENT
HIGH TURBIDITY |
MEDIUM TURBIDITY |
0.2 MICRON |
 |
 |
OIL/WATER INTERFACE SENSORS |
|
Sign up for Email Updates
WSP-19V-2 SPECIFICATIONS |
|
| Dimensions | length 12", diameter 1.82" |
| Maximum Lift Capacity | 80 ft (24.4m) |
| Input Voltage | 12-15 volts DC |
| Maximum Amp Output | 18 amps |
| Use with | Power Booster 1 (PA-10600) or Low Flow with Power Booster 1 (PA-10650) Controller |
| Supplied with | 90 feet of heavy duty 12 gauge wire & yellow connector |
| Required Tubing | 3/8" or 1/2" ID LDPE |
| Duty Cycle | Continuous |
Engineered Plastic
Mega-Typhoon® pump
WSP-19V-2 (19 volt)
The Engineered Plastic Mega-Typhoon® pump is capable of pumping up to 80 feet from ground level by simply connecting the Power Booster 1 or Low flow with Power Booster 1 controller. Then connecting the controller positive and negative alligator clamps to the 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.
Download PDF
features
• can operate under harsh conditions and higher turbidity
• runs continuously in water without the need for a cool down
• sleek exterior minimizes well hang-ups
• very reliable and economical
• 400 hour motor life
WSP-12V-3B SPECIFICATIONS |
|
| Dimensions | length 22", diameter 1.82" |
| Maximum Lift Capacity | 85 ft (25m) |
| Input Voltage | 12-15 volts DC |
| Maximum Amp Output | 13 amps |
| Supplied with | 90 feet of heavy duty 10 gauge wire & battery clamps |
| Required Tubing | 3/8" or 1/2" ID LDPE |
| Duty Cycle | Continuous |
Engineered Plastic
Super Twister® pump
WSP-12V-3B (12 volt)
The Engineered Plastic Super Twister® pump is capable of pumping up to 85 feet from ground level by simply connecting it to a 12 volt battery.
Download PDF
features
• can operate under harsh conditions and higher turbidity
• runs continuously in water without the need for a cool down
• sleek exterior minimizes well hang-ups
• very reliable and economical
• 400 hour motor life
no controller needed
This pump uses a built-in booster box and cannot use a controller.
WSP-24V-3 SPECIFICATIONS |
|
| Dimensions | length 17", diameter 1.82" |
| Maximum Lift Capacity | 100 ft (30.5m) |
| Input Voltage | 12-15 volts DC |
| Maximum Amp Output | 22 amps |
| Use with | Power Booster 2 (PA-10700) or Low Flow with Power Booster 2 (PA-10750) Controller |
| Supplied with | 110 feet of heavy duty 12 gauge wire & green connector |
| Required Tubing | 3/8" or 1/2" ID LDPE |
| Duty Cycle | Continuous |
Engineered Plastic Tsunami® pump
WSP-24V-3 (24 volt)
The Engineered Plastic Tsunami® pump is capable of pumping up to 100 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.
Download PDF
features
• can operate under harsh conditions and higher turbidity
• runs continuously in water without the need for a cool down
• sleek exterior minimizes well hang-ups
• very reliable and economical
• 400 hour motor life
WSP-24V-4 SPECIFICATIONS |
|
| Dimensions | length 20", diameter 1.82" |
| Maximum Lift Capacity | 120 ft (37m) |
| Input Voltage | 12-15 volts DC |
| Maximum Amp Output | 30 amps |
| Use with | Power Booster 2 (PA-10700) or Low Flow with Power Booster 2 (PA-10750) Controller |
| Supplied with | 35 feet of heavy duty 12 gauge wire, cigarette plug & battery clamps |
| Required Tubing | 3/8" or 1/2" ID LDPE |
| Duty Cycle | Continuous |
Engineered Plastic Monsoon® pump
WSP-24V-4 (24 volt)
The Engineered Plastic Monsoon® pump is capable of pumping up to 120 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.
Download PDF
features
• can operate under harsh conditions and higher turbidity
• runs continuously in water without the need for a cool down
• sleek exterior minimizes well hang-ups
• very reliable and economical
• 400 hour motor life
WSP-24V-5 SPECIFICATIONS |
|
| Dimensions | length 26", diameter 1.82" |
| Maximum Lift Capacity | 150 ft (46m) |
| Input Voltage | 12-15 volts DC |
| Maximum Amp Output | 34 amps |
| Use with | Power Booster 2 (PA-10700) or Low Flow with Power Booster 2 (PA-10750) Controller |
| Supplied with | 160 feet of heavy duty 10 gauge wire, green connector |
| Required Tubing | 3/8" or 1/2" ID LDPE |
| Duty Cycle | Continuous |
Engineered Plastic Hurricane® pump
WSP-24V-5 (24 volt)
The Engineered Plastic Hurricane® pump is capable of pumping up to 150 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.
Download PDF
features
• can operate under harsh conditions and higher turbidity
• runs continuously in water without the need for a cool down
• sleek exterior minimizes well hang-ups
• very reliable and economical
• 400 hour motor life
WSP-24V-6 SPECIFICATIONS |
|
| Dimensions | length 26", diameter 1.82" |
| Maximum Lift Capacity | 200 ft (61m) |
| Input Voltage | 12-15 volts DC |
| Maximum Amp Output | 40 amps |
| Use with | Low Flow with Power Booster 3 (PA-10850) Controller |
| Supplied with | 210 feet of heavy duty 10 gauge wire, blue connector |
| Required Tubing | 3/8" or 1/2" ID LDPE |
| Duty Cycle | Continuous |
Engineered Plastic
Mega-Monsoon® pump
WSP-24V-6 (24 volt)
The Engineered Plastic Mega-Monsoon® pump is capable of pumping up to 200 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.
Download PDF
features
• can operate under harsh conditions and higher turbidity
• runs continuously in water without the need for a cool down
• sleek exterior minimizes well hang-ups
• very reliable and economical
• 400 hour motor life
High Performance
|